I1 Pro 2 Driver Download
Note: Windows 7 does not prompt for driver installation when a device is first attached. To install the driver, go to Start/Control Panel, select System and then select Device Manager on the left-hand side of the System Properties window.
i1 pro 2 driver download
Packages made for older distributions may work on newer distributions as long as nothing substantial has changed (i.e. Python version). Also there are several distributions out there that are based on one in the above list (e.g. Linux Mint which is based on Ubuntu). This means that packages for that base distribution should also work on derivatives, you just need to know which version the derivative is based upon and pick your download accordingly.
If you want to verify the integrity of the downloaded file, compare its SHA-256 checksum to that of the respective entry in the SHA-256 checksum list. To obtain the checksum of the downloaded file, run the following command in Terminal: shasum -a 256 /Users/Your Username/Downloads/DisplayCAL-3.8.9.3.pkg
If you want to verify the integrity of the downloaded file, compare its SHA-256 checksum to that of the respective entry in the SHA-256 checksum list (case does not matter). To obtain the checksum of the downloaded file, run the following command in a Windows PowerShell command prompt: get-filehash -a sha256 C:\Users\Your Username\Downloads\DisplayCAL-3.8.9.3-[Setup.exewin32.zip]
If you want to verify the integrity of the downloaded file, compare its SHA-256 checksum to that of the respective entry in the SHA-256 checksum list. To obtain the checksum of the downloaded file, run the following command:Linux: sha256sum /home/Your Username/Downloads/DisplayCAL-3.8.9.3.tar.gzmacOS: shasum -a 256 /Users/Your Username/Downloads/DisplayCAL-3.8.9.3.tar.gzWindows (PowerShell command prompt): get-filehash -a sha256 C:\Users\Your Username\Downloads\DisplayCAL-3.8.9.3.tar.gz
If you are using Windows 8, 8.1, or 10, you need to disable driver signature enforcement before you can install the driver.If Secure Boot is enabled in the UEFI[12] setup, you need to disable it first. Refer to your mainboard or firmware manual how to go about this. Usually entering the firmware setup requires holding the DEL key when the system starts booting.
We offer two different Shuttle products, the Pro V2 and the Xpress. Shuttle Xpress comes equipped with 5 programmable buttons while the Shuttle ProV2 comes equipped with a robust 15 programmable buttons. Both models offer the Jog/Shuttle wheel and full driver support, to ensure no matter which Shuttle you choose, you will be able to maximize your productivity.
Two Market Leading Products, the i1Basic Pro 3 and the i1Publish Pro 3, described below.The i1Basic Pro 3 calibrates and matches up to four displays connected to a single computer and unlimited displays connected to different computers for consistent viewing. With the i1Basic Pro 3, you can quickly and easily create custom monitor and projector profiles that ensure the colors you view are true, verify soft proofs and print quality with built-in Quality Assurance (QA) tools, and easily capture and manage spot colors. The i1Publish Pro 3 is for designers, photographers, or prepress professionals who rely on accurate color throughout a digital workflow, the i1Publish Pro 3 is the must-have solution to profile and calibrate cameras, monitors, projectors, scanners, and both RGB and CMYK+ printers. Get the most color accurate displays, prints and proofs, with repeatable results every time.--X-RITE TRADE-IN OFFER: Earn up to $400 (US) for trading in your old i1 deviceQualifying i1Pro3 instruments include:i1Basic Pro 3i1Basic Pro 3 Plusi1Publish Pro 3i1Publish Pro 3 Plusi1iO for i1Pro3Qualifying Trade-In i1 instruments include:i1 Pro or i1 Pro UV Cut,Eye One Revision A through Di1 Pro 2,Revision Ei1iO Gen1 and Gen2,Revision A through DTRADE-In DETAILSBuy your new i1 instrument from CHROMiX and then Get started by going to the Trade-in Promo main web page. We recommend that you read these instructions carefully. The instructions are specific and the rebate may be rejected if not completed correctly. Note: You will need to ship your trade-in unit to X-Rite.The X-Rite Trade-In Promotion is valid until December 31, 2022.For more information contact CHROMiX Sales(at)chromix.com or call (206) 985-6837 Ext#1. Notable Features i1Basic Pro 3 Benefits:Offers a custom, full-spectrum LED light source, which allows for single-pass scanning and improves device reliability and accuracy.Measures M0, M1, and M2 simultaneously in a single-pass, cutting scanning time in half.Features an ergonomic design for easy cleaning and accurate measurements.Reads smaller patches than the i1Pro 2 with improved accuracy.Provides real-time user feedback to ensure accurate measurement position and a self-check tool to adjust and correct minor shifts.PANTONE Color Manager software enables accurate capture and management of spot colors and helps users build palettes of best match PANTONE colors that are auto-extracted from their own images.Includes download link for i1Profiler software featuring basic and advanced modes for professionally calibrated and profiled monitors (including presets for video production workflows), projectors and scanners.Support for measuring high brightness displays (up to 5000nits), improve emissive measurement, resulting in the best possible calibration and profiling of monitors and projectors.Easy upgrade to i1Publish software to add complete printer (RGB, CMYK, CMYK + any four) profiling and quality control functionality, and camera profiling capabilities. Easy transfer of licenses from i1Photo Pro 2 and i1Publish Pro 2.Optimizes automated file creation in less time and material waste during production when combined with the i1iO Generation 3 automated scanning table. Built upon the success of X-Rites i1Pro 2 spectrophotometer as the de facto industry standard for more than a decade, i1Pro 3 features the next generation of industry-leading technology delivering increased accuracy, ease of use and an expanded professional-level feature set including the latest developments in ISO standardization. The i1Pro 3 is equipped with the X-Rite Graphic Arts Standard (XRGA) to make it faster and easier for companies and professionals involved in digital production printing to adhere to ISO standards and have confidence that data sent or received from all links in the supply chain are reliable and repeatable, reducing waste and rework. It provides real-time user feedback to ensure accurate measurement and a self-check tool that adjusts and corrects for minor shifts.i1Basic Pro 3 includes the i1Pro 3 Spectrophotometer; i1Profiler Software; ColorChecker Proof; ColorChecker mini; PANTONE Color Manager Software; and robust i1 accessories (Ambient Light Measurement Head, Monitor Holder, Scanning Ruler, Backup Board, Spot Color Positioning Target, Soft Carrying Case).i1Publish Pro 3 Benefits:Offers a custom, full-spectrum LED light source, which allows for single-pass scanning and improves device reliability and accuracy.Measures M0, M1, and M2 simultaneously in a single-pass, cutting scanning time in half.Reads smaller patches than the i1Pro 2 with improved accuracy.Features an ergonomic design for easy cleaning and accurate measurements.Benefit from perfect printed colors every time with RGB, CMYK and CMYK + any 4 with intelligent iterative profiling technology for best quality results and advanced controls for black generation and separations.Provides real-time user feedback to ensure accurate measurement position and a self-check tool to adjust and correct minor shifts.Achieve true colors on all modern laptop and desktop display technologies, such as LED, Plasma, RG Phosphor, OLED and Wide Gamut up to 5000 NITs.Capture spot colors off virtually any surface ideal for creative design or corporate brand requirements* and keep your PANTONE libraries up-to-date, accurate and ready to use in Adobe and Quark creative applications with PANTONE Color Manager for color palette creation and swatch bridging software.Optimizes automated file creation in less time and material waste during production when combined with the i1iO Generation 3 automated scanning table.i1Publish Pro 3 also includes many display and printer profiling and quality assurance functions. When printing CMYK, take advantage of device link profiling to optimize CMYK files across various devices, preserving the black channel and inks. When its time to repurpose multiple CMYK files, device link profiles ensure reliable color. For an even more controlled and accurate color workflow, i1Publish Pro 3 also includes PANTONE Color Manager software for easy capture and management of spot colors, keeping PANTONE libraries up to date with color palette creation and swatch bridging software.i1Publish Pro 3 includes the i1Pro 3 Spectrophotometer; i1Profiler (i1Publish) Software for monitors, projectors, scanners, RGB and CMYK+ printers; download link for PANTONE Color Manager Software; ColorChecker Proof, ColorChecker mini, and robust i1 accessories (Ambient Light Measurement Head, Monitor Holder, Projector Holder, Scanning Ruler, Backup Board, Spot Color Positioning Target, Soft Carrying Case). SpecificationsApertureMeasurement aperture: 4.5 mm (0.18) diameter (effective measurement aperture during scanning is depending on the patch size and measurement speed) Available Disk Space2GBCalibrationManual on external ceramic white reference (included)Communication InterfaceUSB 1.1ConnectivityPowered USB portDimensions (length, width, height)i1Pro device: 162 mm x 69 mm x 64 mm (6.4 x 2.7 x 2.5)Display Resolution1024x768 pixels or higherExperience LevelIntermediate to AdvancedHumidity30 to 85% RH (non-condensing)Illumination Spot Size3 mm (0.12)Inter-Instrument Agreement0.3 dE00 avg, 0.8 dE00 max (deviation from X-Rite manufacturing standard at a temperature of 23ºC (73.4ºF) on 12 BCRA tiles (D50, 2º))Internet ConnectionRequired for software install, download and automatic updateLanguages SupportedChinese (Simplified), English, French, German, Italian, Japanese, Korean, Portuguese, SpanishLight Sourcei1Pro3 Plus LED Illumination (including UV)MacintoshMacOS X 10.11x, 10.12x, 10.13x, 10.15 (with latest upgrades installed)Measurement Conditions: M0 - UV included - ISO 13655:2017 M1 - D50 - ISO 13655:2017 M2 - UV excluded Filter - ISO 13655:2017Measurement Frequency in Scanning Mode400 measurements per secondMeasurement Geometry45/0 ring illumination optics, ISO 13655:2017Media Thickness1mm or lessMemory2GB MinimumNumber of Displays Supported per WorkstationUp to 4Operating Temperature Range10C to 35C50F to 95FPatch SizeMinimal Patch Size in Scanning Mode: 7 x 7 mm (0.28 x 0.28) (Width x Height) with sensor ruler 10 x 7 mm (0.40 x 0.28) (Width x Height) without sensor rulerPhotometric Range10nm; Sampling interval 3.5nmProcessorMAC: Intel Core 2 Duo CPU or better; WINDOWS: Intel Core 2 Duo or AMD Athlon XP or betterScan LengthMaximum 260mm (10.24")Scanner Target SupportYesScanning CapabilityYesSecurityUser must have Administrator rights to install and uninstall the applicationShort Term Repeatability - White0.05 dE00 on white (D50,2, mean of 10 measurements every 3 seconds on white)Single Pass ScanYesSoftware Development KitAvailable for OEM customersSoftware ModesBasic & AdvancedSpectral Analyzeri1 technology with built-in wavelengths check; Holographic diffraction grating with 128-pixel diode arraySpectral Range380 - 730 nmSpectral Reporting380 ... 730 nm in 10 nm stepsStorage Temperature Range-20 to 50C-4 to 122FSupported Profile FormatICC version 2, version 4.3, & iccMaxUnit ColorBlack/SilverUser ExperienceChoose between a basic, wizard-driven interface or an advanced, user-driven interface for highest level professional resultsVideo CardMAC: Latest drivers for video card installed;WINDOWS: Latest drivers for video card installed, dual display support requires either 2 video cards or a dual head video card that supports dual video LUTs being loadedWarrantyTwelve (12) months from the date of sale, unless different local regulations apply. Product registration is required to receive X-Rite technical support during the warranty period. Registration can occur directly through the software, on our website, or via phone. Users are encouraged to register their product within the first 30 days of use.Weighti1Pro device: 285 g (10.1 oz)What's Included?i1Pro 3 spectrophotometer (measurement device), calibration plate, ambient light measurement head, monitor holder, positioning target, scanning ruler, backer board, USB cable. i1Profiler v3.x software for monitor profiling plus QA for monitors and printers, PANTONE Color Manager software, ColorChecker Proof, ColorChecker mini.Windows 7, 8, 8.1, 10 (with latest Service Pack installed)